Groz Surface Gauge With Extra Spindle

Product Brief
A basis tool for machinists and toolmakers, the Universal Surface
Gauge is used for accurately scribing lines, transferring
measurements or probing surfaces in inspection work. Design
incorporates
A fully hardened and ground base which serves as an
accurate
reference surface
A machined Vee groove in the base allows the gauge to be
used
conveniently on curved surfaces
A Vee groove at the front end allows the spindle to adjust to
any
angle above or below the base allowing it to be used as a
height gauge and also as a depth gauge.
Two retractable pins allow the gauge to be located against the
edge of a surface plate or T-slot for linear work
A 1/4″ (6.35 mm) hole in the spring loaded scriber holder
allows a
dial indicator to be attached conveniently making the gauge
useful
for checking flatness, parallelism, heights, depths etc.
Grooves on the side of the base allow for comfortable grip
Well tapered scriber for better sighting while working. The
scriber
tip is hardened to 55-60 HRC

code:SG/9-12